[YannChris]

Hello,

Did you try Beoparts?

Regards,

Yann.

https://www.beoparts-shop.com

[YannChris]

Thanks Mark,

And good luck on this herculean task.

Yann.

[YannChris]

chartz wrote:

The thing is, downloading just doesn’t work (for me anyway). I’ve tried and tried to no avail. Here’s the (broken) link to the Beogram 4000 SM:

https://beoworld.dev.idslogic.net/?a=download&key=d89b8f3c639fdc2b0fb3fe8dd8461b4f

Hi Chartz,

Just tried the link, it worked.

Regards,

Yann.

[YannChris]

“‘Skærm’ means – translated – ‘Screen’ – but what does a screen has to do in an audio device”

On Theatre connected to a LG TV, the 2 tabs are logical (unfortunately, “Music” sources are limited to USB and Line-in, all sources available on NL/ML are missing).

On Core with NL/ML Converter in the game I agree with MM, especially when the 2 tabs shows almost the same sources.

Kind regards,

Yann.

[YannChris]

This version starts with no noticeable regressions.

One step forward: while listening Core on connected Beolabs, one can go directly to the Labs volume control by tapping the cross on left-top of the playback screen (on the first attempt, one has to “call” the Labs tab).

I agree with Sandyb’s remark about Signal Info. I suggest substituting the “Name” row with “Signal Info” so that settings remain in the settings menu and information is displayed on the main screen.

When it comes to Tidal, I would really appreciate to have the same integration for Qobuz.

Kind regards,

Yann.

 

[YannChris]

Hi,

I woudn’t, both Beocenters and Beolabs are designed to be always connected to mains.

Regards,

Yann.

[YannChris]

Hello,

Did you try to assign fixed IP adresses to your products (I would make a test on one product only)?

This is how I did this in my case, reserved adresses are defined out of the DHCP range.

I don’t have a mesh network, it might be different on your Orbi.

Regards,

Yann.

 

[YannChris]

Hello Beoworlders,

New version available: 5.9.0.240515…

Sources are back.

As I do not use Deezer, I cannot test the search function.

Kind regards,

Yann.

[YannChris]

After further checks:

– no source selection on Theatre, Beosound 1 and NL/ML Converter.
– sources selection available for Beosound Core.

Already reported through the app.

Yann.

[YannChris]

Same thing for Theatre:

[YannChris]

It seems to be the same for Theatre

[YannChris]

Hi,

All sources disappeared in NL/ML Converter.

Regards,

Yann.

[YannChris]

Hello,

In my case, speakers are 15 cm from the rear wall and 60 cm from corners.

Regards,

Yann.

 

 

[YannChris]

Hi Beoworlders,

After a few days of testing everything goes well.

Note that I do not use my Beo5 and 6 that much as they are part of my secondary system.

I’ll let you know if things turn bad.

Kind regards,

Yann.

 

[YannChris]

Hi,

2 batteries delivered yesterday, one installed in a Beo5.

Placement was a bit difficult as they seem to be very slighly bigger than the original one (especially near the cable outlet).

Charge failed with a 7,5 w phone charger, but was successful with the B&O one.

After one night out of the charger the remote displayed full charge.

So I’m satisfied for the time being.

Regards,

Yann.

 

 

 

[YannChris]

Hi,

Strike on the workbench?

Only 2 topics listed.

Regards,

Yann.

[YannChris]

Mark,

Yes, PM are useful and it would be nice to have them back.

Regards,

Yann.

[YannChris]

It seems some topics are uncomplete, replies are partly shown.

For example this thread: https://forum.beoworld.org/forums/topic/beogram-6006-arm-not-going-back-to-parking-position/

I well remember having recieved replies on my request, but all are missing.

Regards,

Yann.

[YannChris]

On some topics, replies are missing.

For example this one “Beogram 6006 – Arm not going back to parking position – BeoWorld Forum” (as adding a link leads to an error, I cannot do better).

I well remember having somes replies to my request and only my initial post appears.

Regards,

Yann.

[YannChris]

I tried to add a link in a rteply to this topic as I noticed something strange.

Submitting the post leads to “there has been a critical error on this website” message.

Tried several attempts, all failed.

Regards,

Yann.

[Author]

Posts