[Tignum]

When I have all components of my garage sound system I will also try it out and report!

Many thanks so far! J.

[Tignum]

Hi B3OHACK3R, very nice to have you on board too! Could it be the BLC only fails to supply the POWER+? My ideal solution would be a ‘cable’ going from the USB socket to the MasterLink RJ45 socket of the BLC. I can then use the ML socket for the BL2000. Anything that comes close to that would be great!

Regards, Johan

 

[Tignum]

Hi Madskp, nice to have a fellow wonderer! When I will get my (5th) BLC I will produce a USB to RJ45 5V cable and test it. Trusting I will not brick the BLC with that! I read somewhere the thought that the BLC is mainly developed to bring ML sources to NL and not vice versa. This explains there was no need to provide ML power.

I also believe there is more going on inside the ML Power Box than just put 5v into ML. If someone has one, could open it and share a photograph of its magic content, that would help a lot I reckon. A mini flux capacitor could be in it? Who knows?

Regards, Johan

[Tignum]

ChristianHak wrote:

That joint for sure looks amazing to start with!

[Tignum]

When I read the title of the post I thought WHAT?! You got me there haha.

[Tignum]

Razlaw wrote:

I have a Beosound 3000 connected by ML but it does not have the newer software chip to function well with a BS5 also connected. Have spent many hours trying to get both to work together well. The BS3000 would need a new chip with Option 5. Second, having N Music available both from NL and Mozart products and the BS 5, I thought might cause problems…..although as I type this it occurs to me I could rename N. Music on the BS5 as well as N. Radio.

Hi Razlaw, my thought was to introduce a second BLC: one for the BS3000 and one for the BS5, both A.Slave. That should allow to ‘filter’ the audio sources you want to have ‘mapped to NL’. And maybe solve your Line In / Mozart problem?
In my (non Mozart) set-up I do the same: I have one BLC feeding BS5 N.MUSIC into NL, and one feeding BS6500 CD into NL. Works well.
Just to be sure! Hope this helps, regards, Johan

[Tignum]

Hi Razlaw, I can start/stop the BS5, go to next/previous song, instruct a new MOTS seed, access colored favourites, select internet radio stations from preset list. So basic control. In my case the BS5 is in the office/attic where I use it mainly. But in the kitchen/living I often listen to BS5 N.MUSIC and let it MOTS on. I am discovering songs in my own collection that I sofar never really listened carefully to! And I enjoy knowing that my B&O kit is maximally integrated. Regards, Johan

[Tignum]

Hello Razlaw, I would say option 1? The only ‘no speakers connected’ setting is 0, but that is disabling IR remote control. Apart from Option 1, all settings are meant for a MasterLink setup in my view.

“The music system has five different Option settings:
Option 0. Used when your music system is connected to your video system and no speakers are connected directly to your music system.

Option 1. Used when your music system is set up on its own or connected to a video system, when speakers are connected to your music system.

Option 2. Used when your music system is set up in one room and connected to a video system set up in another room.

Option 5. Used when your music system is set up in a link room which also comprises a Bang & Olufsen television.

Option 6. Used when your music system is set up in a link room without a Bang & Olufsen television.”

Regards, Johan

PS – why not ML connect it to a BLC and enjoy control from other devices?

[Tignum]

Beoboyo55 wrote:

Hey! I’ve got this converter for sale. Its in excellent condition. I am missing the power adapter unfortunately.

Hi Beoboyo55, FYI, these BLCs work with a normal 230V power cable, no adapter/transformer needed. Regards, Johan

[Tignum]

Hello matador – good hint! I checked my plumbing box and found a few strong plastic rings with a matching (outer) diameter. I cut off the rubber ‘sock’ from the adaptor and found metal – steel for the magnetics with the base obviously. I fixed the ring with some good double sided tape, and it works well:

I will now try and find TX5 1.5mm x 5mm screws as one of them has a very tired head.

Merci! Regards, Johan

[Tignum]

Hi, I do have the original battery still – it says:

• basic cells by PANASONIC
• HHR-120AAB33 F1x2
• 2.4 Volt / 1200mAh
• BEO5 PA-PN0095.R002

there is a (Dutch) vendor that uses a photograph of the original battery, priced at 69 euros, here: https://www.idav.nl/beocom-5-6-batterij.html.

Hope this helps. J.

[Tignum]

Hi Matador, that is a generous offer, I think that it is a highly complicated part to measure and draw!

For now I just some horribly cut transparent packaging tape to keep all parts together while I will get a virtual machine working and the configuration tool running.

Some better cut black tape (maybe plotted) could do the trick also. Let me try that first.

The plastic material of the ‘ring’ is quite soft, I guess for a silent placement. But it got torn anyway. The plastic close to the copper contact points feels much harder. It could be a 2-piece construction maybe? Regards, Johan

[Tignum]

Back on topic 🙂 No one with a crashed Be05/6 with a good adaptor part?

Regards, Johan

[Tignum]

Hi Matador, no the bad one had a white sticker: https://beoworld.dev.idslogic.net/forums/topic/beo5-beo6-software-firmware-versions/#post-31292 but I get what you say – can we trust the appearance?

Regards, Johan

[Tignum]

Googling the EAN code on the box resulted in this site: https://www.batteries4pro.com/en/multimedia/remote-control/3,19049-24v-12ah-nimh-battery-for-remote-control-bang-olufsen-beo5-4894128166993.html. They use a very similar image. Quite a bit cheaper. Worth a try? Regards, Johan

[Tignum]

Hello Matador, I did use this battery https://www.123accu.nl/Bang-Olufsen-8700091-HHR-120AAB33-F1x2-accu-2-4-V-1200-mAh-123accu-huismerk-i47359.html for some weeks now and it seems to work fine.

Regards, Johan

[Tignum]

Hello, that is correct. I bought two batteries in the end.

This one did not work.

It seemed to work at first, but would not charge. Sometimes it showed it was fully charged, but when the remote was taken off the charger, it told it was low.

This one (from here: https://www.123accu.nl/Bang-Olufsen-8700091-HHR-120AAB33-F1x2-accu-2-4-V-1200-mAh-123accu-huismerk-i47359.html) worked:

Its box:

Hope this helps! Regards, Johan

[Tignum]

Hi Steve, would it be an idea to explore how B&O has set up their support team, how they organized dealing with the different requests coming from their customers?

Regards, Johan

[Tignum]

The cat enjoying Bryan Ferry behind the couch.Regards, Johan

[Tignum]

Curious to see how much love these good old CX100s are going to get xschop!

[Author]

Posts