[Rotti]

Also- auch hier will ich die Lösung nicht für mich behalten:

 

Man muss eine Beo4 Joystick Typ verwenden.

Frag mich nicht warum, aber seit grad eben läuft die Kiste.

Hab nirgendwo etwas zum Umstellen gefunden, aber es funktionierte damit -und zwar auf Anhieb und so wie beschrieben.

Danke für die Mithilfe 🙂

[Rotti]

Ok, there is nothing worse than a thread asking for help and not posting the outcome in the end.

 

I finally found the solution to this problem:

Just use a Beo4 – “joystick model”

That´s all.

Rest works as described.

I have no idea, why it wouldn´t work out with a standard Beo4, but it´s a solved problem now.

Just posting, in case someone faces the same problems.

[Rotti]

they flash/work permanently, if I press and hold the button. The TV notices that, too. It just does´t react in the desired manner. If the set is in “code entry mode”, I can shift the cursor left and right with << and >>. But it will not get into mastercode entry mode. No matter, what I do. Also doesn´t jump with other keys

[Rotti]

Hello Guy and thanks for the quick response.

I already faced the “downtime” of 3 hours twice and the set came back to life after this regularly.

No matter what I do, I don´t get access to the master code menu. That seems to be the root of all evil.

I´m not really sure, if it´s the fault of the remote control, as all buttons are working and are recognized by the TV somehow. Still have another Beo4 here, but it doesn´t work right now. ( Display vanishes as soon as a button is pressed and reappears after letting it go, but that´s another topic. Mentioned it only to point out, that there is no choice to try anoter RC at the moment).

Service manual sounds good, as the set seems to have starting issues from time to time, maybe as a result of a faulty power supply (capacitors or stuff?) , but that´s a thing, I will have to take care of another day.

 

I´m not really sure, if there is something special , that I didn´t realize or that I was probably doing wrong, but the longer I think it over, it seems that the menu is kinda blocked or the remote doesn´t exactly fit(??). Usually, the designers will prevent end users from doing inappropriate entries by coincidence, but who knows??? Maybe there´s a second stage of entry options or stuff? User´s man doesn´t relate to that, no warnings.

[Rotti]

Das ist eine gute Frage. Laut Homepage handelt es sich um einen MKII (Type 9361)

Die Beo4 ist definitiv eine “Alte”, also das Modell ohne Joystick.

Ist da tatsächlich ein Unterschied?

Alle anderen Tasten, also up/down und forward , sowie “go” funktionieren tadellos und werden vom Gerät in ihrer Bedeutung voll akzeptiert.

Auf die << reagiert er so gesehen auch, wenn ich im Menü , also bei der Pincode Eingabe wieder eine Stelle zurück springen will. Das macht er klaglos. Nur die Umschaltung von 4 auf 5-stellig geht nicht.

Den Mastercode hätte ich wiegesagt.

 

Danke schonmal!

 

[Author]

Posts