[patcherley]

Missed being able to browse and use the site, still a few issues but coming together

[patcherley]

I have a BLC connected to a Beomaster 7000. I can use the B&O app to use the Core to select and play a Beomaster source but if I use the BLC in the App it sits there for a few moments and the drops back to no source. The BLC is set to VMaster. What am I doing wrong.

[patcherley]

I have updated my Eclipse, apart from the UI haven’t noticed any real difference, not sure I really like the new UI. But again I also don’t use the UI much at all, it I watch a TV programme I go straight there with the BeoRemoteOne short cut button.

[patcherley]

Thanks to both of you, I will read the supplied link but tend to favour the non-hobbist path.

Paul

[patcherley]

That’s very useful. Paul

[patcherley]

Since the, relatively, new PC had built in speakers I have often used them for convenience while working. I tried the line out socket sometime ago and it worked and it is more convenient than the headphone one in my setup. Paul

[patcherley]

I unplugged the line out from the Beoport and connected to my phone, played some music and it worked. So I put the cable back into the Beoport and it also worked! Maybe I had disturbed the cable earlier and have now connected it properly. Thanks for getting me to try this.

Paul

[patcherley]

I do have speakers, well actually an old hifi system, connected to the Powerlink port but nothing to the headphone jack. Will try another device to the line in.

Paul

[patcherley]

Carola, thanks for that about the primary, I thought I had seen something like that but couldn’t find it.

I have spoken to my local dealer who sold me the core and they said the same about the preference but I already had it set. They have raised a call with B&O about B&O Radio. Will report back on response.

[patcherley]

Just had a response from B&O support. It is a known issue which they are working to fix. There is a temporary solution to switch the radio back to Tunein and then back to B&O Radio, this works for me.

It might be that I migrated to B&O Radio before adding the Core.

[patcherley]

An update. I did a factory reset and this time I made the BLC the primary Beolink product and the Eclipse the secondary Beolink product and I can both select the Masterlink sources in the local sources screen and then choose them in the app and on the remote. I can select the Eclipse sources in the local sources but they do not show in the app or the remote. I can join a playing Eclipse source.

Still no B&O Radio and I appear to be at the last version of the software, 2.1.50871.22855122.

Paul

[patcherley]

The app shows B&O radio but it also says the Core does not support it. Will carry on investigating. Paul

[patcherley]

My database shows 2021-11-15. I tried running the database updater, it said successful but made no difference. Paul

[patcherley]

It is called Loftbox, it is quite old. It does have a Sat input. From what you are saying could I not just boost the signal coming into the loftbox? Paul

[patcherley]

The loftbox lounge cable.

[patcherley]

I have tried 2 metal splitters, one 47 – 860 MHz and one 0 -1000 MHz. The second one seems better. I will try a complete retune as some stations lock on and others give just static.

[patcherley]

I did before resetting the audio sources. But no help.

[patcherley]

Thanks for that. Paul

[patcherley]

Just tried on a PC and works very smoothly. Paul

[patcherley]

1) on my Galaxy Tab A far too slow, on my Samsung A13 fine. On the Tab A only works effectively in landscape mode again fine for the A13

2) never sure if I am a fan of the book approach over pdf readers they look good but I find scrolling can be more effective

3) I do see that value of the ability to browse a document this way.

Thanks for the work in adding this. Paul

[Author]

Posts