Forum Replies Created
- AuthorPosts
-
It is possible to access the control center from a BROne with this workaround:
I use ATV4K Connected to a BV7-55 and have it controlled with the BROne with PUC as a “Beo4” product, but with at Theatre it should be even easier since both Theatre and ATV are BT connected
I have connected my BROne directly to the ATV 4K through BT so I have the ATV as a BT source in the Remote as well.
I switch to the ATV with the BROne in “Beo4” mode. ATV is mapped to a MyButton
Then I change source via List on BROne to ATV4 (BT), and I can use the INFO button as TV/Controlcenter (long press will open controlcenter), and the MENU button as Back button. The StandBy button will also bring up the Control center when BROne is directly connected to the ATV4
Updated to version 5.5.1.23111057914 (not beta) yesterday, and now I can use all my BLC sources again on A6 and Cores.
Same here – never signed up for beta testing, and i’m now on 5.5.0.23102756407 on my apple devices.
sources are a mess – from NL converter only CD is visible on my A6, but there is 2 Line in sources visible (LINE IN and Line-in). Multiroom is not working correct. When I start B&O radio on the A6 in the office, my BL28 in the living room are also starting up… multiroom button not working for A6, but works for BS Core and BL28…what a mess !
Yes, it is not possible without a BROne version with BT.
Now you have a reason for getting some new toys?
@JPurvis – Have you tried the workaround that I I described above ?
It is possible to access the control center from a BROne with this workaround:
I use ATV4K Connected to a BV7-55 and have it controlled with the BROne with PUC as a “Beo4” product.
I have also connected the BROne directly to the ATV 4K through BT so I have the ATV as a BT source in the Remote as well.
I switch to the ATV with the BROne in “Beo4” mode. ATV is mapped to a MyButton
Then I change source via List on BROne to ATV4 (BT), and I can use the INFO button as TV/Controlcenter (long press will open controlcenter), and the MENU button as Back button
Have you tried to play a DVD in the Blueray player?
What kind of sources (like cable-TV) are connected to the tv ?
Can you go into the menu of the BV?
You can actually control group volume in the app.
In the multiroom screen you can use the volume up/down buttons on the iPhone to control the volume on all active products at the same timeI am using the B&O app, and playing on a A6, a Core and BL 28. From the multiroom screen I can control volume for all 3 at the same time with the volume up/down buttons on my iphone. Works both with B&O Radio and Deezer as source.
18 February 2023 at 09:27 in reply to: Beovision 7 40 mk6 and Master Link – Strange behaviour – Volume levels #43650What are the standard sound settings for video and audio sources in the BV ?
you see it where you also adjust the soundlevel, bass, treble etc.
It is the same with Beolab 28 – I can’t access my Beocenter 9500 directly from BL 28 even though the Beolink is activated, but can do it from my Core’s and A6, but the menu is simply not there on the BL28.
The BLC (BC 9500/BG9500) is configurated with BL28 as “Connect to Primary”. If I start the BC/BG directly from the device itself or with the BROne/Beo4, the BL 28 register that the BC is active and starts within a few seconds to play, which works fine for me, since they are both located in the living room, and there is no speakers connected directly to the BLC.
But it would be nice to be able to control it from the app…
I just made a search in the B&O app on the word “Christmas” in both TuneIn and B&O Radio..
B&O Radio = 10 hits
TuneIn = 31 hits
In Denmark, PUC controls for Yousee tv box would be great (Humax YS5000 and YS4000)
I use a small Bluetooth transmitter always connected to the headphone socket on the BV 7 55. Then I can just turn the BT transmitter on and connect to the headphones, mute the TV and then I can control the volume in the headphones while the TV is still muted. When I unmute, sound is back on the TV
- AuthorPosts
