[Madskp]

Nicholson wrote:

Am I correct to assume that Data male-to-male 2-pin minijack cable is a special B&O cable? I can’t seem to find any in my searches.

It might be called trigger cable or mono cable. I think the most important is that it has two male 2 pin minjack 3.5mm conenctors

[Madskp]

Ahh now I see what you mean. Found this thread with the video showing the cleaning https://beoworld.dev.idslogic.net/forums/topic/who-wants-his-beosound-9000-to-live-forever/#post-11109

[Madskp]

I got a Beosound Ouverture and just did a quick test with powerlink from that to the Powerlink connector on the BL3500 MKII just to see if it was any different than the Powerlink connections from my MCL2AV that I had tried with previously.

Tried with ML both on and off, but no reaction from the BL3500 at all.

[Madskp]

It works for me too now that I see that the pictures are shown when clicking the links.

Thanks ?

[Madskp]

matador wrote:

Laser eye to be cleaned/replaced. Common fault.

Will try to clean it before I take anything apart to check if that helps.

matador wrote:

ape belt, common fault again. Full tutorial on the old forum, unfortunately with pictures missing. 2 hours work and quite an adventure but pretty sure that’s the fault (three Ouvertures, three time the problem).

Thanks for the heads up about estimated time consumption 🙂

I found the thread here https://archivedforum2.beoworld.ouronlineserver.com/forums/t/26380.aspx

A google search for Beoworld Ouverture belt shows a thumbnail of one of the pictures in the search result.

 

[Madskp]

Thanks for the input. I will defeneatly check all the buttons before I begin.

Could be great if the CD reading issue is just about cleaning. If anyone has other input in that regard it is very welcome

 

[Madskp]

Just aquired a BS Overture with some issues for tape and CD, but the ML part of it is working fine, so I thought I might do some testing with that and the BLC 1611 and BLC 1614 boxes.

BS Overture A-opt. 2 – ML – 1611 – iphone

All video commands will activate the video input on the BLC 1611. No audio commands will do anything. Guess that the audio commands are all assigned to the internal sources, and the AUX input. But a great way to get an extra aux input for a BS Overture.

Same setup but with a BLC 1614 showed the same result, which also makes sense as there is a Audiomaster in the setup.

 

Also tried a quick teest with one of the BLC 1610 boxes with an external 12V supply, and set to local 1611 and tried the 1-2-3 switch in all positions but with no response. Might be that I also need a -12V supply to make it work, or that particular box is defect, or that it will not work at all.

 

 

[Madskp]

I would suspect that 2 of the pins is Ground and probably internally connected.

If you have a multimeter you could do some continuity testing to find out if any of them is connected.

hope this could help you a little

[Madskp]

Can you choose to control B&O TV’s in the Fire Cub settings?

if not there might be a risk that it doesn’t use 455khz Ir signals as used in B&O remotes.

[Madskp]

Just added some extra info regarding the early SW versions that I found in the old forums

[Madskp]

Guy wrote:

Any plans to make the stand work, or does it already?

This solution https://neomesteren.dk/en/saadan-installeres-bm-7-adapteren should be able to do that, although limited to certain tv manufactures.

[Madskp]

Btw could I ask you to check the software version of your BL3500?

It is done by pressing menu, menu, 0, 0, GO

I have another thread where I am trying to find out which software versions that has been available, so just to see if there are some version that I don’t know of.

Thanks in advance

[Madskp]

Good to hear that it is working now.

Always nice with an easy fix.

 

[Madskp]

I don’t see you mentioning if you can play music from the BS 9000 on the BL3500, but the subject suggest that you can’t?

One thing to check for first if is Masterlink is enabled on the BL3500 by pressing

Menu, menu, 0, 9, GO with a BEO4 remote. Then you should be able to choose ML on or off with up and down arrows.

If it is on you can also check the ML status by pressing Menu, menu, 0, 2, GO

This will either show: NO ML, ML OK or an error 1-4.

Let me know what you findings are

[Madskp]

I am trying to get a better overview over what changes there has been in the different software updates for the BL3500.

I have tried to compile a list with source links to where I have found the information. There seems to be some overlaps in what functions has been introduced in what software version, and some versions I haven’t found any info for.

Any inputs to clarify the list is very welcome:

BL35000 MKI / LCS9000

SW ver. 1.0

• several problems with many functions not translated onto the Masterlink

Source https://archivedforum.beoworld.org/forums/t/6489.aspx

• Clock not displayer when used with MCL

Source https://archivedforum.beoworld.org/forums/t/6489.aspx

 

SW ver. 1.1

• LCS 9000 was released with software 1.1 ? Is this true if there was a SW 1.0 ?

Source https://archivedforum2.beoworld.ouronlineserver.com/forums/p/1963/16816.aspx#16816

• Some improvements in Masterlink

Source https://archivedforum.beoworld.org/forums/t/6489.aspx

 

SW ver. 1.2

• ?

SW ver. 2.0

• Software version 2.0 provides full Masterlink comptability

Source https://archivedforum2.beoworld.ouronlineserver.com/forums/p/12574/109632.aspx#109632

• Fix control of linked TV’s in the same room as LCS9000/BL3500 MKI. Changing channels on TV could only be done by using number buttons in SW < 2.0

Source https://archivedforum.beoworld.org/forums/t/7175.aspx

 

SW ver. 2.1

• Software version 2.1 provides display text update and new source names. No new features have been added to Software 2.1.

Older versions -> Software 2.1

A.TAPE -> A.MEM
A.TAPE2 -> N.MUSIC
V.TAPE -> V.MEM
V.TAPE2 -> DVD2
CDV -> DVD ?
PHONO -> N.RADIO
SAT -> DTV

Source https://beoworld.dev.idslogic.net/forums/topic/beolab-3500-and-1611-converter-settings/page/7/#post-14279
And https://archivedforum.beoworld.org/forums/t/36474.aspx

However DVD also seems to be shown instead of CDV in SW 2.0 according to https://beoworld.dev.idslogic.net/forums/topic/beolab-3500-and-1611-converter-settings/page/7/#post-14281

BL35000 MKII

SW ver. 2.1 ?

• Was this software available in BL3500 MKII ?

SW ver. 3.1

• Provides wireless comptability

Source https://archivedforum.beoworld.org/forums/t/36474.aspx

SW ver. 3.3

• The upgrade to version 3.3 was to allow wireless link

https://beoworld.dev.idslogic.net/forums/topic/beolab-3500-and-1611-converter-settings/page/7/#post-14296

SW ver. 3.33

• Support the a.aux command and ml gateway compatible

Source https://archivedforum.beoworld.org/forums/t/36474.aspx

• Powerlink functionality in combination with Beolink Wireless 1?

Source https://archivedforum.beoworld.org/forums/t/42470.aspx

SW ver. 3.3.4

• ?

Source: The SW version is mentioned in this thread, without mentioning of what it does:
https://archivedforum2.beoworld.ouronlineserver.com/forums/p/34675/256398.aspx#256398

 

[Madskp]

XavierItzmann wrote:

I am buying an IR Eye for my BLC. After all these years, I had failed to realize that there are multiple “buttons” available. From when we first got a B&O decades ago, I had thought the only button was “LIGHT”! Well, it seems to me that a “Join” button would be spectacular, if were able to make our BL 6000 speakers to join in whatever is playing elsewhere. Or are there better-suited IR Eye options for our setup? Thanks in advance.

I don’t know if there are better suited IR options, but if you only need the IR functionality you should be able to use most of the external IR eyes B&O has made including the rectangular ones from the MCL products, as long as only GND, 5V and IR data is used and wired correctly.

But If you need the button functionality of the IR eyes you are limited to the one with the JOIN button as the other IR eyes use different BUS communication between the IR eye and the unit it is controlling.

[Madskp]

A little searching on google lead me to this project https://github.com/jamesarbrown/Beolab-3500-Squeezebox where a BL3500 is converted to be controlled with a raspberry PI and a touchscreen, and the original display, microcomputer and crossfield PCB is removed.

Might give some inspiration as to how the BL3500 can be powered on by external 5V.

Will look further into this

[Madskp]

hello Steve

here is the cable drawing

It is indeed scart data from pin 8 to pin 6 in the mini Din and called AVL

[Madskp]

Millemissen wrote:

P.S. Will be interesting to know if it turns on the BV11, when one starts playback manually on the BC2? MM

there was a thread regarding the AV connector on the old forum where it was mentioned that the data is only one way. If that is correct this will not work, but it could be great to have it confirmed by someone with a similar setup

[Madskp]

Millemissen wrote:

But that must be true for CD playback as well.

The manual for the BC2 is not that clear in that regard. It shows selection of DVD and CD respectivly with the BEO4, however on the front panel there is only one button called disc.

Also in the chapther of DVD operation there is a box with supported formats wich also includes Audio CD.

what is unclear to me is if the DVD player part also handles CD playback when the CD command is used or if its another part of the BC2 that handle this.

 

[Author]

Posts