[Leosgonewild]

I had the same issue. It started the calibration process, but it would just do the two or three first low frequencies before it aborted.

I swapped the microphones, and the issue was duplicated to the other speaker.

I did however have a failing chassis also (the midrange had no sound), so I ended up with a chase swap and a new microphone.

Now the fugged up thing with this is that they are MK1. One speaker had already had a chase repair (swap), and the geniuses at the factory in Denmark had replaced it with a MK3-chassie. So now I am running one Mk1 speaker with software 1.6x, and a MK3 with software 3.6x

So what messes up this now is that when they are off, the MK1 stays red, but the MK3 goes completely off after a few seconds.

Only fix is to downgrade the MK3 to 2.6x

[Leosgonewild]

Welcome to Beoparts-shop

[Leosgonewild]

Very impressive!

how do they sound?

[Leosgonewild]

The Beograms are literally in standing in the closet. I did not mean to make a joke.

[Leosgonewild]

I have a few Beogram 4002’s in the closet. Maybe I should make a 2SLHBTQA+ version? Just jam all the colors onto it.

[Leosgonewild]

Kirin, my system is driven by a Denon x4700h

I have a 7.0.4 system

[Leosgonewild]

buy a Oled tv. Not Samsung qled.
I have a LG C9 65” mounted on a Beovision stand.
very happy with it.

 

don’t mind the cabeling in the picture.

[Leosgonewild]

A8 is 2.4 ghz. Is your new network only running 5ghz maybe?

 

 

[Leosgonewild]

I still swear a lot every time I am setting up something in google home.

Is chromecast activated on both speakers?

I’d be willing to have a call with him to help him try to solve it.

[Leosgonewild]

Are they added to the same room?

[Leosgonewild]

I have been dreaming of this for 10 years…

 

[Leosgonewild]

I just finished restoring this.

[Leosgonewild]

Is there any damage to your original metal strip? It is easy to remove with some heat. Then it can be attached to the new lid.

[Leosgonewild]

Yes, you just need google home to set it up. After that the stereo pair will show as a chromecast device.

[Leosgonewild]

Yes, they can be stereo paired in google home.
you can also have multiple stereo pairs in a speaker group.

[Leosgonewild]

Thanks for solving my problem (or lack of error searching skills), Geoff ?

[Leosgonewild]

I tried to lay the speaker on its back. Still same scratching.
I took it off, and when I press it down with my fingers, I can’t reproduce it.
Considering to cut off the dust cap and use some air pressure.

As you can see from the pictures I doubt that I can source the driver.

 

Thanks for the welcome back ?

And now for the million dollar question:

what song was I listening to when I noticed the issue?

 

[Leosgonewild]

Amazing documentation of the process, Matador. Great pictures ?

As you have written in other posts, the placement of the new foam in the column is incorrect.
Would it be possible to replace the pictures in this thread in order to make this writeup correct?

 

[Leosgonewild]

I can`t figure out how to send you this picture in a PM. But feel free to use this picture in your writeup. (and also delete our comments after it)

 

[Author]

Posts