[kronzilla]

Probleem is, 9000 heeft speakerlink en 9300 heeft powerlink.
9000 met de bl6000 is geen goed huwelijk vrees ik. Stel anders je vraag eens aan Steave van Sounds heavenly. Die gast wel ern oplossing vinden.

waarom gebruik je niet de bc9000 met passieve speakers en bc9300 met lab6000?

[kronzilla]

Hello, do you still own the Beolink 7000 ?

[kronzilla]

Noo it is an extremely expensive grease. I ordered in the past the lubrication from B&O.

Klüber Barrierta grease L55/1

try to buy a small amount because 1kg cost 1755€.
it is a white grease, not corrosive to plastic gears and bearings.

[kronzilla]

You mean the laser or a new cdpro2 module?

[kronzilla]

Regarding the differences:

beocenter 9000 has another laser than the 9500 ( identical to cd5500) and the 9300 has original cdm4, upgraded to cdpro ( same laser like Beosound 1 cd).

[kronzilla]

Could be that the laser reach the end. Or laser current must be corrected ( don’t do if you are not familiar, you would kill the laser from overcurrent)

[kronzilla]

Im not totally agreed. You had beovox rl60 who had foam surrounds, after that rl60.2 with rubber surrounds. For durability i would take rubber surrounds. But that is my opinion. I would not re-do the process each 15y because it’s time consuming

[kronzilla]

Zo vlug mogelijk laten doen. Hoelanger de foam erin blijft zitten hoe meer schade er kan aangericht worden…

[kronzilla]

Well actually the bc2000 has output to passive speakers ( beovox) and your beolab needs powerlink, a variable line signal…

[kronzilla]

You need to be creative and make a PL cable L to output cinch L and one PL cable R to output cinch R.

it is a variable signal so you can use active speakers or a stereo power amp or monoblock’s.

or if you want to do it neat like B&O, one powerlink cable and at the other end L and R out

[kronzilla]

NOO don’t replace the woofers. Just replace the foam surrounds with rubber ones so they will not desintegrate again in 15y. If you replace the woofers, it is not the same speaker again. Rubber surrounds are cheaply to obtain. If you can’t do it, ask somebody to do that.
and just look how the capacitors are in the crossover ( mostly Roederstein elco’s i think, now Vichay).
succes

[kronzilla]

20xxx and i know they are mk2 with abl (aka mk3).

Actually i know exactly that there are 4 versions of the 8000…

And i hear the difference between mk2 and mk2 ABL too…

[kronzilla]

It is not that easy. It is not only the woofers but partially the amplifiers too.

[kronzilla]

If you compare the specs, the cx100 is going derper in the low frequency range but the maximum sound pressure is higher in the bl4000

[kronzilla]

Actually i own BL8000(from 2007) and BL4000 and i really don’t like their sound compared to my Beovox RL60.2 and RL140. The sound is thin and missing depth. The soundstage is not so wide. So my experiences ence is that the older bigger Beovox speakers sounding warmer and more romantic/more pleasant to my ears. And the moderner ones with Icepower have Listening_fatique on my ears. I have a very good hearing. (Offtopic i listened at a dealer on a pair of expensive b&w speakers with a heavy McIntosh tube amp(6xKT150/ch) and the feedback in the amp was extreme. The sound was cold and harsh and lifeless. (and it is always Eric Clapton. Mein gott. Frying your eardrums).All the listening pleasure was gone. I even got a starting headache from the sound ) So in my opinion i like even The Beovox more than Beolab. Maybe it is because im a hyper sensible person. I don’t know…

[kronzilla]

Je kan ook gewoon testen of je remote werkt door je gsm te nemen, je back camera van je gsm aanzetten en je remote naar de lens richten. Als je remote werkt zie je witte flitsen in beeld als je op een willekeurige knop drukt op de remote ( camera ccd is ir_gevoelig.
hopelijk helpt dit je probleem op te lossen

[kronzilla]

Seems that is was indeed not done at the factory (not properly bend). Maybe you could download the service manual and looking where it is in the diagram to clear things out

[kronzilla]

You are right it looks much better than the very expensive ones (indeed too wide and bulky) and your solution is also alot cheaper

[kronzilla]

Woofer cones? Or you mean the rubber surrounds?

[kronzilla]

That is true. Only the abslutely technical 100% perfect panels are reserved for B&O. Even if it would fit of working the quality would be nog good enough.

[Author]

Posts