[kirin]

Beozip wrote:

(…) Eine überaus klare Sprache kommt Aber seht selbst …..

Ich finde das ist eine tolle Idee, zumal ja die Beolab 7-4 teilweise günstig zu bekommen sind, da zur Zeit viele ihre TV Sets auszuwechseln scheinen

[kirin]

Hallo zusammen,

ich finde die 4000er auch für Musik deutlich besser, und sehen zB zur Ouverture etc… auch schick aus. aber zB das ganze Beosystem 2500 hat auch einen besonderen Charm (also mit Beolab 2500). Auch fand ich Beolab 4000 zT für Sprache schlechter geeignet? (subjektiv)

In meinen 2500ern hatte ich tatsächlich ähnlichen „Baaz“, aber entgegen zu den Beolab 4000 konnte ich den Leiterbahnen-Ätz Fehler finden und reparieren.

( in einem anderen Thread fragte ich schon ob jemand je die 4000er foam rot Leiterbahnen Opfer reparieren konnte?)

Viele Grüße!

[kirin]

Hello, my experience was unfortunately, that this is a beginning of the end of a a beolab 4000 speaker due to the foam-rot issue, just search the archive forums for „Beolab 4000“ and „foam“. These damping materials inside the Beolab 4000s are getting old and sticky and etch the PCBs to death. Resulting in the case that Beo4000’s do not switch on any more.

BTW, did anybody manage to repair them?

Best regards

[kirin]

Hello together,

the PC2 could be used with a Beolab 2000 or -3500?

These are quite cheap nowadays where I always found esp. the 2000 not too bad, in fact, for voice/Radio or voice on TV I like it very much. It could be a sophisticated home office setup for dry meetings held remotely 😉

I am not sure whether a Beo4 could control this setup?

I agree on the software, which is at least better than beomedia 1 – which is also in my cellar 😉

Best regards

[kirin]

Hello Remmel, this is indeed different from my Beo6500-CD-situation, where the motor always did spin up but could not get the tracks accordingly. So, in my case the repair was luckily quite straight forward in exchanging the one mentioned cap. (I have some left, btw…)

Maybe Martin can judge this. The linked Cap Kit seems to be a good approach, anyway.

Regards, K

[kirin]

Dear all, especially Lee, Keith, and also Foxtrott and Tignum and Steve and all others for the enthusiastic comments, I cannot beleive it! I was not logged on here as I am sick at the moment (nothing serious) and am overwhelmed by the double-win! Where I usually do not win anything… 🙂

So, many thanks!! this forum is really a great one, where I learned a lot since over 10 y’s and had already huge fun with 🙂

best regards, Christian

[kirin]

Hello Remmel, sorry I have to answer in English:

In the old new forum there were many discussions on an issue with a faulty capacitor on the servo PCB. I had similar issue like you with a 6500 Beogram CD. I could figure out that it might be that because the CD player worked with CDs containing only few tracks, and when it was warm, also with CDs which failed when being cold (just plugged in).

It was then quite easy to order this cap, dismantle 6500, and solder the new cap into it. Worked perfectly again afterwards.

Maybe you can find a similar post in the Archived Forum.

In the next days I could search for type and brand and location of that capacitor

Regards, K

[Author]

Posts