[kirin]

Hello Johan, that looks impressive, it is nice to see classic components integrated again! I like laundry room and garage and not to forget the bottle opener 🙂

Have you planned to feed your living room TV with 4k input and in case yes, how do you then connect the BS3 to have the 7.1 sound? Best regards!

[kirin]

Many thanks for the reply! Yes, I have seen that, I will give it a try.

[kirin]

Hallo zusammen,

mal wieder ein schönes Thema 😉

Beoplay A1 hat m.E. einen echten Charme und Mehrwert wegen des Mikros. Foxtrott, wie war denn die Sprachqualität und v.a. das Mikrofon im Vergleich zum Jabra Teil? Hat Guy‘s Lösung auch ein Mikro?

Zu Beginn von Homeoffice & co stellte ich Beolab 4000 + Beoport am PC auf, bis die 4000er dem schwarzen Papp im Inneren zum Opfer fielen. Aber, etwas mit Mikrofon hätte schon was.

Grüße zurück aus dem Süden

[kirin]

Hello Roland,

did you check whether the CMOS battery is still fresh, it should measure 3V?

I had that, resulting in a failing startup. After exchange it did run again.

The link to the beo5 tool could be found in the old (the 2nd archived) forum. maybe a suspicous link(??). but downloadable image without suspicous software inside, actually the binary image to be flashed onto a usb stick

good luck and best regards

[kirin]

That is a great constructional work, good looking as well!

[kirin]

Hi drmichi, could you show some details how you did connect the wall mount of the screen to the stand?

Thanks !

[kirin]

Hi, that is a nice project, thanks for sharing, including the up and downs. (where we all learn most…)

I liked the sentence „And it is salvation for the brain from time to time to escape from our daily life.“ 😉

I d like to ask whether color management of the Phillips had to be adjusted afterr being finally mounted behind the glass screen?

And, how are external devices plugged in? Especially regarding the sound connection. I assume,when following the traditional connection, all is ok wrt the sound. But do you have already a solution for hdmi inputs? (eg blu ray disk sound)?

Best regards

[kirin]

Hi there, that‘s a nice topic 🙂

I had the first series of S45‘s + an old Beomaster 2400, and next to them their updated version S45-2 on stands with a beosystem 4500. I still love their sound, but in a bigger room now work the S75 together with a Beosystem 6500, which play my music in a brilliant way 🙂

Next to this I like Beolab 7-2 + Beolab 6000 for a TV setup. I am astonished by the quality of the 6000‘s

For a small radio setup I had a Century which is superb for music + speech, which I prefer against Beosystem2500/Ouverture + Beolab 2500. I would swap back but I need the Masterlink. Because the Beolab 2000 as a satellite is also perfect for radio (speech) to my ears 🙂

[kirin]

Hi,

just wrote you a PM but maybe other people are interested as well:

Do you have a photograph of both speakers, M75 andM100‘s next to each other?

I am thinking about replacing my S75‘s but am unsure about additional space they would most probably need.

Further question, what is the size of M100 stand compared to M75? I have such stands but do not know whether they belong to m75 or M100

Thanks in advance

[kirin]

Thank you! They look really gorgeous, both of them.

[kirin]

Perfect, thanks! Then I am ready for the 100‘s but will have to convince my wife 😉

And, if you don‘t mind, as long as you still have both, a picture with both M75 vs M100 would be really nice. Maybe also to put the Flash-your-B&O thread back to live 🙂

best regards, Christian

[kirin]

Hi Beoandy, tat is really a good finding, thanks! Having a Beosystem 3 in the cellar, which is not in use exactly due to this circumstances…

[kirin]

AdamS wrote:

My main loudspeakers are Beolab 90s and I also use Beovox MS150.2s regularly.

Hi Adam, that is indeed superb! which amp do you use for the MS150.2s?

ps/edit: how to get out of the quote mode?

edit 2: ah it works, thanks Guy!

[kirin]

Congratulations and merry christmas!

And thanks for this nice place, here 🙂

[kirin]

(can’t edit my above post), MM is right, tagging tool is mp3tag 🙂

mixed up with mp3directcut which was great for cutting files (if needed, e.g. after a digitalization job)

[kirin]

Hello Stan

I made quite good experiences using CDEX for the ripping job, and MP3DirectTag for Tagging. All inWindows.

Where I have to add that I used mp3 with a high data rate. MP3directtag had also access to some databases. Unfortunately, getting the album art was more and more a pain (no interface to amazon any more), but somehow i managed.

I always copied it to Beomaster 5 using the seevice mode, with an external USB Stick, but it works also quite good via the shared folder.

 

[kirin]

Hi Matador, all,

this is fabulous! It remembers me to this thread,

https://archivedforum2.beoworld.ouronlineserver.com/forums/p/49897/354382.aspx#354382

now in old forum, both really great work.

I just want to mention that one could re-use wooden blinds for the lamellas, like ikea „Lindmon“ (I think, not available any more but there are many similar on the market)?

Best regards!

[kirin]

Vielen herzlichen Dank für die

Antwort! OK, ich befürchte, ich muss irgendwann dann doch mal für die Penta Platz machen 🙂

viele Grüße!

[kirin]

Hello,

this is indeed a good idea to put all of this into a clean and working product! I would be interested whether you support – or plan to – a 5.1 beolab setup like any other Beo7 (or Beosystem 3). Maybe one would have to buy an external decoder and feed its input by HDMI ARC or something like that?

Best regards

[kirin]

Entschuldigt wenn ich den älteren Thread hoch zerre, aber, T.W.G., das ist interessant was Du schreibst. Es gibt zwar sicher Berichte im alten Forum, aber dennoch würde ich hier gerne fragen, wie denn Du die Beolab 1 im Vergleich zu Beovox Penta sowie Beolab Penta einschätzt? 😉

Viele Grüße und allen einen schönen Sommer

[Author]

Posts