[Ipe]

@Beoaddict

From where did you begin to unscrew? From back or front? I did not find that kind of service manual with exploded view. Just ask because I don’t want to do extra work or any mistakes:)

[Ipe]

Hi, TV 124kg + two strong guys would be at least 300kgs. I really question durability of my old house stairs:) They also make 90 degree curve and are relatively steep……..

[Ipe]

Hi, been planing to move bv9 upstairs next weekend. Checked it (TV) a bit from here and there. Should not be a bad thing to do at all. Lets see how it goes:)

 

[Ipe]

Hope this helps

[Ipe]

Hi,

Did it but no help:) Press (Beo4) “menu”, “0”, “0”, (zero, zero) and GO.

That is how you’ll enter to service menu.

[Ipe]

Yep, came to same thoughts. Took that out also some time ago. Can it be some software problem? Did you try to reset the tv? I’ll do it today. Sometimes the way of the bits is just waiting someone to do that:)

Actually I sound like me calling to online help.

“Good morning. I have some problem with my………”

……aaand before you end your question…….

“Did you take the mains cord off? Did you push the reset button? Did you start your device again?” etc.

Only 9.90 / minute. For members -20% 😀

There are few of these BV9’s for sale at quite reasonable price but far away from here. Should buy a ferry ticket for a driver (me) and for the van:)

 

[Ipe]

Hi,

My tv also have just that grey scale bar and the camera stays in its hiding place. Luckily picture is still quite ok. That ACM module – is it possible to take it out and fix. I suppose it manmade:)

So…..?

Tried to check after service manuals for BV9 but did not find any and if anyone have that module as extra there are several of us who are interested.

[Ipe]

Hi,

Here also. Camera is there but don’t want to move:)

[Ipe]

Thanks for the advice.

The reason for problems was that scart cable. I have a box full of those and the fifth was a proper one. They seemed to be fully connected but still there are some difference…..or just broken:)

And when you live long enough…………..:)

Syndicat des Constructeurs d’Appareils Radiorécepteurs et Téléviseurs

[Ipe]

Thanks:)

Have check still that.

[Ipe]

Yep, have the same side open, but still don’t get it working:D

Now I picture and sound on tv, but still can’t use beo4 to controll DVD……….

Is it possible that there is some other solution? If I set options like in that pic

Beocenter does not accept any comands – no sound in cd and nothing from dvd.

Do I have to have ir in socket box ctrl?

 

[Ipe]

Yep, I’ve checked fuses etc. Power comes out from transformer but that’s it.

Both speakers the same. Tried to connect those to other B&O devices also with same result.

 

[Ipe]

Waiting for – 24:)

[Ipe]

Thanks for advice. Found ML cable from local dealer;)

[Ipe]

That impedance came to my mind but I didn’t “believe” it because level

went down even when BS9000 was not powered on at all.

Have to go through boxes if I can find an ML cable. If not might buy one of those boxes you suggested.

Thanks!

[Ipe]

Thanks, of course 🙂

Works fine now.

Ipe

[Ipe]

Beomaster is already under pcs. In my case pc-command don’t work so it’s configured under DVD2/AV4. (pc is not highlighted / available on TV screen “menu/connctions).

So PC is AV5 but there’s no AV5 input in the tv or there is but it’s already in use for Beosystem 3 which is for the tv.

This of course mean also that I can not use remote to configure Bm. Is there some possible way to configure either bv or beo4? Some other on top of those I already know?

[Ipe]

Hi,

On the top right there is a panel and behind that you can find buttons.

Check if VCR would work from there. TV should also automatically detect if there is a tape inserted.

VCR is quite easy to take out as a whole from the back side of TV if it need service.

 

[Ipe]

Well………not working. No service settings available.

Seems also that volume etc. settings not there. If I shut down the whole thing

and take the mains totally off for awhile and restart then settings are available except

those service settings…….:/

[Ipe]

Ok…………but how about those system settings?

How to go there? I can just setup volume, balance etc .

On system settings I just get “language”and “time zone”

There should be some way.

[Author]

Posts