[gpapilaris]

Hi Beouser66- it worked! embarrassed I didn’t see this myself, thanks!

[gpapilaris]

Madskp- thanks for the information, I’ll be very careful or just leave it alone!

[gpapilaris]

Hi Madskp- if you’ll permit, I have a different question. I was going through the Connections menu of my BV7-55, in the Sound Adjustment section, there are 2 Default Speaker options, Default Video= Speaker3, Default Audio= Speaker2. The manual states these defaults can be changed but is silent on how to change them. I now use the Beo4 remote to change Speakers wondering if I can just change the Default and be done. Is there a menu option that shows how many hours the TV and DVD have been used? Manual is silent on that also. Thanks in advance, regards George

[gpapilaris]

Many thanks to you both for helping me with this. So far everything still works but I now have a way to keep CD player working if I have to replace my TV. Regards, George

[gpapilaris]

This may be the answer I’m looking for. I’m running everything through BV-7 now including BS9000 connected by ML. When the BV is no longer functional, I know I have options to use my stand and B&O speakers with a modern TV, it was the 9000 that I couldn’t figure out. How do I change to A-Option 1 to run the 9000 in linked rooms? What happens to ML connection at the BV7? I control with a Beo4 remote. Thanks

[gpapilaris]

Hi Beouser,

Thanks for asking but I now understand the problem. Since B&O abandoned master link the only way I can maintain my current set up is by replacing my old master link tv with another old master link tv. I can update to a new tv and connect my B&O surround to it without the BS9000 and master link. Then possibly I can rewire the master link connecting only the BS9000 to the speakers in the linked rooms but I’m not sure about that either. Since I live in the US it is very difficult to find people who understand master link and are available to help with changes. Sorry to be so long, I do appreciate your help

[gpapilaris]

It looks like I can attach everything to the decoder, do you know if I can use the B&O remote to control the system? I’ll check with almando to see it it will work with US electricity Thanks!

[Author]

Posts