[Gunter Gerber]

Hi beobuddy,

I started just now a again. pressing the top for a few seconds, the LED starts blinking green, the micro comes out…. but nothiing happend. after a short time, no sound and the micro drives back, LED is blinking red.

As I remember, when I got the seaker, the procedure starts like now, but there are different soundings to hear, the micro comes more out after the test – test done. What I did‘nt understand, both speakers running in the same way

Thanks for any idea

 

p.s. I just got an offer for a set og MK3, SW 3.0, serial 2153…. for €6750, model 6881, but from a private person sayinmg the are from 2012. What do you think about?

 

[Gunter Gerber]

Hi there,

I‘m a new member here, but a longterm lover and owner of B&O products.

Starting in 1997 with BV28, BL8000 and later on BS9000. In 2000 BL1 and 2013 a dream came true: used BL5 from a B&O shop, SN 206…. & 207… SW 2.6

I updated TV and audio with an ‚almando‘ electronic, run without any problems till 2020: one BL5 chassis repair. The second BL5 get a new chassis in 2023. There are sound scratches, my description, and the B&O dealer send it to Denmark. I had to pay a big ticket, twice.

So, now, since 2 weeks, I miss the deep tones :(, the auto bass meassurement didn’t work, stop every time, pressing 25sec the top or unplug power for more than 10min doesn‘t help. I’vve read a lot, before I found you here.

Before I go to the dealer again, is it posssible to get help/repair here? I‘m a prof. IT guy since 35 yrs and think, with the service manual in hand, to dismantle the BL5

@beobuddy could you help here? seems you helped a lot, may me too?

thanks in advance

Gunter

p.s. sorry for my english, it‘s rusty after not working in english envireonments

[Author]

Posts