Forum Replies Created
- AuthorPosts
-
https://archivedforum2.beoworld.ouronlineserver.com/forums/p/13275/304134.aspx
not sure pics went through, but here is thread
Hi CharlieWedensday (have you met RubyTuesday :-), Thankyou so much for the response (I have spent all day looking at this). I have everything ready for belts, but was unsure on belt placement. I found info (from this beoworld forum) that showed a breakdown and belt fit. It indicates that the large flat belt also goes round the white cog (pics attached) In my case that might be right as there was quite a lot of perished belt on this cog (hence my concern am I getting the configuration right??). Still not 100% sure
Kind Regards
Tony
Hi Guys, I was really worried about hijacking your thread, so again apologies (I will keep off now). I think I have the belt configuration (not 100% sure) and have just ordered belts from Beoparts-shop
Sincere regards
T
Hi L, did you find out, I found same in mine??
Regards T
Hi Guys, Just a quick update, a bit of common sense and patience, I was able to figure out access (see pic). 2 belts had failed, the big flat one and the small one on the other side (head area). I just need to know the configuration of the big flat belt and where to get quality ones (I would change all 3).
again sorry to be a pain
Tony
Attachments:
You must be logged in to view attached files.Hi Guys, My apologies for using this thread, but don’t know where to turn (could you possibly point me in the right direction?)
I wonder if you could help. I recently bought a Beocord 7000 (plus Beomaster, Beogram CD etc etc) I was over the moon getting it (auction). I took a chance at the auction (cost a wee bit), anyway when I set it up the Beogram CD didn’t play, lucky for me it was just a head clean. When I got to the Beocord 7000, the head/transport did not move (I am gutted) anyway I was able to get access to the cassette unit (I am ok to a certain level of disassembly) and can see that the “big belt” had failed. I wonder if you could help me… I have obviously got the unit out, but unsure how to go further t0 access the belts, also I do not know where to get the right belts and of suitable quality. I think I have the Bang & Olufsen Beocord 7000 Version 2 tape head (if that makes sense). I have attached photos. Any help would be appreciated or pointing me in the right direction.
Forgive me for using the thread, I am new to Beoworld site. I just love the look of the B&O system and really wanted them to be OK.
Sincerely Tony
Attachments:
You must be logged in to view attached files.Hi GraceF9,
I have the same issue, did you find out anything?
Regards
Tony
Hi Andy, I wonder if you could help. I recently bought a Beocord 7000 (plus Beomaster, Beogram CD etc etc) I was over the moon getting it (auction). I took a chance at the auction (cost a wee bit), anyway when I set it up the Beogram CD didn’t play, lucky for me it was just a head clean. When I got to the Beocord 7000, the head/transport did not move (I am gutted) anyway I was able to get access to the cassette unit (I am ok to a certain level of disassembly) and can see that the “big belt” had failed. I wonder if you could help me… I have obviously got the unit out, but unsure how to go further t0 access the belts, also I do not know where to get the right belts and of suitable quality. I think I have the Bang & Olufsen Beocord 7000 Version 2 tape head (if that makes sense). I have attached photos. Any help would be appreciated or pointing me in the right direction.
Tony
Attachments:
You must be logged in to view attached files. - AuthorPosts
