cgh

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
19 March 2024 at 10:40 in reply to: DIY Beolab 8000 Wood frets (STLs included). #36916
cgh
BRONZE Member
- Topics Started 1
- Total Posts 6
Egru123 uploaded the file for me. Please see the post from him
12 March 2024 at 06:56 in reply to: MCP 5500 to a beomaster 6500 #47158
cgh
BRONZE Member
- Topics Started 1
- Total Posts 6
Hi Jakob,

I do not know if you have had any answer to your question, however I am using a mcp 5500 on 6500 system with no problems.
6 March 2024 at 05:28 in reply to: DIY Beolab 6000 Wood frets STL included #53107
cgh
BRONZE Member
- Topics Started 1
- Total Posts 6
As I don’t have a beosound stage available for measuring I do not know what to construct.

Br cgh
1 March 2024 at 08:16 in reply to: DIY Beolab 6000 Wood frets STL included #53104
cgh
BRONZE Member
- Topics Started 1
- Total Posts 6
- I found that the fret when mounting at the Tweeter covers it partially. So I made a replacement fret for this one. See below before and after. Attached is the new fret in stl format. After downloading please remove the pdf in the end.
20 February 2024 at 03:04 in reply to: DIY Beolab 8000 Wood frets (STLs included). #36904
cgh
BRONZE Member
- Topics Started 1
- Total Posts 6
I designed an acoustic lense that will fit on top of the BL 8000, Attached is the stl file.

Thank you for the clips for the BL 8000, it is very appreciated.

I tried to upload the stl file, but it seems not to working??
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)