[Carolpa]

Millemissen wrote:

This is what I currently do (actually right now), if I want to listen to a CD (from the System 6500): I put in the Cd in the tray of the 6500, went to my M3 (using the app) and choose CD. Then I could expand to the Theatre. When I go back to the Theatre (in the app) it shows the converter. See pictures. So it is possible to make the connection. I can even skip tracks with the remote. In addition: turning off with the remote turns off the Theatre – long press turns of everyhing including the BM/CD6500……as should be. What I mean is, that they just have to make it possible to make the settings in the Theatre, that allows for the direct access from there and using the BROne. MM

Correct, that is the way already for a long time (as described before). But the “Product Integration”/”Linked to other product” must be reintroduced to the Theatre (as f.e. the BV11/V1). That was the way to remote control linked sources!

or they must find an alternative way ………

[Carolpa]

BeoMedia wrote:

Sorry, I don’t think I follow – obviously the products need to be connected and the BLC allows for that between NL and ML. If they are not connected you can’t access them across products. Is that what you mean?

You want to start a source connected to a BLC with a remote on for example a BV11 or BV Harmony or a Beosound Core or Theatre…….. is this always possible?

How is this set up? What is possible, what not. Of course the sources have to be connected to be played.
But how are they connected, integrated and accessed?

this what I address

[Carolpa]

Millemissen wrote:

I can’t imagine that a BLI should be needed – to me it seems more a function that has not yet been implemented with the Mozart platform. Let us keep asking them to do so! MM

to my knowledge, only if a BLC can be integrated, direct access to BLC sources is possible with a remote (for example BV11, Beosound Core/35/Essence mkII ); no integration then no direct access with a remote (for example BV Harmony/Eclipse, Beosound Balance, Beolab 28).

 

[Carolpa]

PhilLondon wrote:

Hi, I have a BV11 in one room and a Beosound Core in the other. the BV 11 is setup to borrow Music, Radio from the Core. When I call “link-music” or “link-radio”, it starts, but I cannot change channel or go to the next track. I can only play/pause. Also from the Bang&Olufsen app, I can’t do these operations either, nor can I queue a new song or change radio station if I’m controlling the V1. I can control the Core, but then the speakers in the other room start too. I’ve just move from a Masterlink system to this Network link system and I do not yet know all the subtleties. Philippe

why do you start the sources with “link”.

presumably it will work normal if you start the Core sources on the BV11 without the “link”

[Carolpa]

Tignum wrote:

apart from one (quite annoying) change! – I now MUST start radio from the app.

did you change your BLC settings (“IR Mapping”) accordantly?

[Carolpa]

depending on your needs you got two options.

1. remove the Ouverture and go back to the first discussed setup (BLC A.Master) or
2. buy a PL to AUX cabel and connect the Essence to the AUX of the Ouverture

[Carolpa]

tux wrote:

BV7 is set to V.OPTION = 2 (confirmed by the flashing standby led). Ouverture is set to A.OPTION = 0 (as shown in the BV7-55 manual). BLC is set to ML rôle: source center. In “Sources visible on ML” configuration page, only N.RADIO and N.MUSIC are available. N.RADIO is configured for Essence LineIn (sound from my PC) and N.MUSIC for Essence TuneIn. Feedback:

• A.MEM commands the Ouverture’s tape.
• N.RADIO: Ouverture’s phono
• N.MUSIC: Ouverture’s tape 2
• On Essence (through mobile application), DTV source selected: no sound.

did you check the N.Music, N.Radio boxes on the BLC “experienced mapped to NL” page? And did you set both accordantly on the “IR Mapping” page?

addition:
try the setting proposed, but on second thoughts I wouldn’t be surprised you will have introduced another conflict. Giving the N.Music command to the BV7, ML will instruct the Ouverture to start A.Tape2, whereas the BLC is instructed to start the Essences TuneIn.

[Carolpa]

BV7 should be in option 2. Place it in stby; then press List / Stby on your Beo4; press list until you see V(ideo) Option in the display; then press 2. Notify if the BV7 has responded with a short off/on of the stby light.

adding the Ouverture changed the ball game completely. Now if you give a A.MEM (=A.Tape) command which should start? The BLC with TuneIn or the A.Tape of the Ouverture.
and the ML chain does already has a A.Master and a V.Master so the BLC cannot be set to A.Master anymore! So the only option in your setup left is Source Center. So program the BLC (set f.e. N.Music as TuneIn of your Essence)

[Carolpa]

SimonWeir wrote:

but in truth I prefer WiSA because always on, rather than me looking each time I change listening position to see if the green light appears.

Always on can also wired be established, just a setup thing!

[Carolpa]

a. what is the option set for the BV7? option 2?

b. there is no other Radio source (set) in ML and/or NL?

c. The BS5 is disconnected from the system?

d. does TuneIn already play on the Essence when you start Radio

[Carolpa]

try, set the “connect to (primary)” to “Beolink Converter NL/ML”, but the more probable cause: did you set the “IR mapping”?

[Carolpa]

Sia43 wrote:

There is no need to discuss difference in preferences as it is individual. When it comes to exactness I believe the issue of sound separation becomes an issue, especially with music with many layers of tones (such as orchestral). It then becomes obvious that woofer’s quickness and their numbers play a central role. The more woofers you have (assuming that they are nicely separated using high quality cross-overs), the better different tones can be separated. That is probably why many people love their Pentas. It is also a fact that newer B&O speakers tend to have more woofers. So maybe the newer Beolabs can reproduce the sounds better.

In princple it is ALL individual preferences and individual preferences only.

Just for the simple reason, you were not present during recording, mixing and mastering of the recording, let alone for the reason that you not know what the artist intended.

What you hear is your interpretation of the artist intentions, you like it or you don’t.
That said the speakers are part of this.

Note that some music you’ll experience sound even better on cheaper speakers or older or newer or expensive speakers.

[Carolpa]

advice:

In “Experience mapped to NL” one can rename the available sources. Especial if you have more BLC’s with different sources this can be helpful to identify f.e. one CD player from the other,

I renamed the sources connected to my BS9000 BLC as cd9000, radio9000 and aux9000, the sources connected to my BS7000 BLC as Beogram 6000, cd7000, tape7000…………..etc.

[Carolpa]

Frog wrote:

the only source that worked came from the Beosystem 4 – but I di get NETRADIO coming through the speaker.

this depends on the sources set on the BLC (“Experience mapped to NL”) and the “Connected to (primary)” set in the BLC

[Carolpa]

Frog wrote:

I’m at a loss to understand why as surely the BLP should activate if it senses a signal on the PL.

did you use a fully wired PL cable?

[Carolpa]

Frog wrote:

Yes, as above. There are more ML devices connected (too many to list!) no speakers are connected to either BLC ML/NLs. I’ve used the first BLC-ML/NL as a bridge between the two networks – and its working fine/.

I would make the next setup:
a. Disconnect the ML between the BLC and the BL Passive
b. Connect both with PL
c. Set this BLC as V.Master
d. Set for this BLC “Networklink”, “Connect to (primary)”: the other BLC
e. Be sure all the sources of the other BLC are set in “Experiece mapped to NL”
f. advice: add an IR-eye to the BLC (with the BL passive connected; IR-eye with the “JOIN” button)

to listen to your A.Master on the BLC with the BL Passive.
1. open B&o app
2. tap the BLC (with the BL Passive)
3. tap the black bar below with the name of this BLC
4. tap the three dots
5. select the/ a source of the A.Master

To test this setup, I have connected BL8000 to a BLC. Another BLC is ML connected to a BS3000. The sources CD, Radio and Aux are made available to NL. The BS3000 BLC is set “Connect to (primary)”.
As described I started the BS3000 CD to the other BLC.

addition: to be able to set the volumes of the BLC, go to “Settings”, “Beolink” and set the “BLC Network Link volume” in the App

[Carolpa]

Frog wrote:

Here are my answers: Question 1: which of the following is your setup a. BL Passive ML connected to BLC – NL devices – another BLC ML connected to your A.Master, or b. A.Master ML connected to BL Passive ML connected to BLC – NL devices? >>config A is the setup Question 2: which NL devices are connected? >> I have a Beosystem 4, the other NL/ML converter, a Beovision 11 Question 3: you want to move the BLC/BL Passive, does this room have a NL device? >> no, it’s a bathroom, so no other device is in the room.

So, I’m correct to state the system is like this:
BL Passive ML connected to a BLC – NL connected to a Beosystem 4, BV11 and another BLC with an A.Master ML connected. Right?
Are there more ML devices connected to the A.Master? or speakers connected?

 

 

 

[Carolpa]

Frog wrote:

I’m trying to connect a BLC to a NK/ML mixed network. to do this, I’ve connected a Beolink Passive (with speakers attached) to a BeoLink Converter NL/ML via Masterlink , the Beolink Converter NL/ML is in turn is connected to the NL network. I already have an audio master in the ML network. Connecting the Beolink passive to the ML network works fine – but as I want to move this to a different location, I have the converter in-between I’m at a loss how to configure the Beolink Converter NL/ML – A.Master shouldn’t work as I already have one, but A.Slave doesn’t allow me to select any sources on the NL (or ML) network with the Beolink Passive/

Question 1: which of the following is your setup
a. BL Passive ML connected to BLC – NL devices – another BLC ML connected to your A.Master, or
b. A.Master ML connected to BL Passive ML connected to BLC – NL devices?

Question 2: which NL devices are connected?

Question 3: you want to move the BLC/BL Passive, does this room have a NL device?

 

[Carolpa]

Alsfeld wrote:

Regarding the Bang & Olufsen support (I asked for support), audio streaming of the TV program from the Beovision Harmony to Beosounds does not work! In reality, it works but unfortunately with a time lag = echo.

True, if you playing something on the LG, f.e. the Music app of LG and link to other B&0 devices.
But NOT true if you stream directly, f.e. DLNA sources or TuneIN, to the B&o Harmony using the B&o app. Then the sound will be in sync. (if the time delay on al devices are the same, as supposed).

[Carolpa]

LeMirage wrote:

who dared? My Edge is stable and no complaints, so a little hesitant…. Software 2.1.50871 – Release date 26th October 2022 Enhancements: – Improvements to network stability – AirPlay 2 improvements – Spotify Connect improvements – General bug fixes

my BS Shape has this version…… until now no issues.

note: the A6 and BS35 have the (beta) version since some time 2.1.50399 installed. Both work as supposed. The BS35 has a strange phenomenon: the display keeps displaying “visible as…” after a disconnection from the mains. This is solved by doing a factory reset and reinstall the settings.

addition: the M3 has v2.1.50872

[Author]

Posts