[BeoworldGarcia]

The new rep-amp is working much better. But right channel is not working, think it may be the cable.

So for B&O MMC2 you need an MM compatible pre-amp, like the one I bought:

And the reason I even need a pre-amp is probably because the BeoMater 1900 I have has screwed up Phono Inputs as was said above.

Thanks all.

[BeoworldGarcia]

Yeah the faint sound is the record, it is just one channel left, and some humm.

I am going to try a different pre-amp that says it is MM type compatible. Think that might help.

The guy that sold it to me swears it was working fine when he shipped it.

thanks.

[BeoworldGarcia]

So, I got a preamp, Pyle Phono Turntable Preamp, https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B00025742A

Hooked up the RCA from the Beogram RX2 to the INPUTs, and sent the Outputs to the RCA to 5-DIN, into the Tape (also tried the Phono) inputs to the 1900.

I hear a very faint sound, some hum, but not working properly.

Any ideas?

Thanks!

 

[BeoworldGarcia]

OK thanks, going to try a pre-amp.

[Author]

Posts