Tuning a BEOMASTER 7000 with a BEOLINK1000

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #33567
    TheHuf
    BRONZE Member
      • Topics Started 1
      • Total Posts 3

      Hi there ,

      I’m new to the B&O scene. I have acquired a BEOMASTER 7000 with BEOLINK1000 controller +with Menu tab. Can I tune the radio with it. I’m presuming this is not possible & I need a BEOLINK 7000. Are there any key combinations I can use to tune each station. Any help / tips grateful accepted.

      Best wishes, Keith

      #33569
      TheHuf
      BRONZE Member
        • Topics Started 1
        • Total Posts 3

        Thanks for the suggestions, I’ll look at this when I’m back. Thank alot.

        #33570
        TheHuf
        BRONZE Member
          • Topics Started 1
          • Total Posts 3

          Hi, I got the hang of the tuning quickly

          Once I worked out which stations had good reception.

          Thanks.

          #33568
          trackbeo
          BRONZE Member
            • Topics Started 8
            • Total Posts 253

            Use single number keys 0-9 to go to radio station presets. Use the GOTO button to type in tuning with number keys. GOTO then TURN switches AM/FM. There’s search mode, too, with << and >> buttons. You may find the Beocenter 9500 manual helpful because it describes using the older Beolink rather than the special Beolink 7000, which is what the Beosystem 7000 manuals describe.

          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.