Screws for Beolab 6000 base - BeoWorld Forum

Screws for Beolab 6000 base

This topic has 2 replies, 2 voices, and was last updated 2 years, 1 month ago by MendorPickran.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
26 September 2022 at 09:33 #39296
MendorPickran
BRONZE Member
- Topics Started 2
- Total Posts 3
I’ve just taken possession of some Beolab 6000s with the grey and black aluminium bases but don’t seem to have the screws. I suspect I binned them in the bubble wrap.

Does anyone know the size of them screws?

Regards,

Matt
26 September 2022 at 10:43 #39297
Tignum
GOLD Member
- Netherlands
- Topics Started 8
- Total Posts 368
Hi Matt, welcome!

The service manual says 4×16 (for pos. 15):

and that is correct: M4 x 16mm, with a 7mm head.

I need to clean my caliper :-).

Good luck! Johan
26 September 2022 at 11:00 #39298
MendorPickran
BRONZE Member
- Topics Started 2
- Total Posts 3
You absolute legend.

Thanks so much.

Matt
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.