Screws for attaching Beovision 10 40 to stand - BeoWorld Forum

Screws for attaching Beovision 10 40 to stand

This topic has 2 replies, 2 voices, and was last updated 2 years, 3 months ago by Drencrom.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
18 August 2022 at 05:43 #37065
Drencrom
BRONZE Member
- Topics Started 2
- Total Posts 3
Hi guys I’m hoping you can help out.

I need the screws to mounth my Beovision to the stand but can’t find any on ebay. Am wondering what size screws I need?

T
18 August 2022 at 07:02 #37066
Tignum
GOLD Member
- Netherlands
- Topics Started 8
- Total Posts 368
Hello Drencrom, and welcome!

The two screws that connect the H shaped bracket to the rotating stand are M5 x 20mm.

The diameter of the head is 8.3mm, I reckon this is standard.

Hope this helps!

Regards, Johan
18 August 2022 at 07:25 #37067
Drencrom
BRONZE Member
- Topics Started 2
- Total Posts 3
Hi Tignum, thanks for the welcome and informing me what screws I did.

Really appreciated.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.