[BramBoerema]

Hello,

I was wondering if someone already has the 3D files for the 6000 serie. And ifnot is the outline of the 6000 the same as the 6002? Because i can design the clamps for the 6002 but im not sure if they will fit on the 6000.

[cgh]

I designed an acoustic lense that will fit on top of the BL 8000, Attached is the stl file.

Thank you for the clips for the BL 8000, it is very appreciated.

I tried to upload the stl file, but it seems not to working??

[egru123]

Thanks cgh providing the stl File. I used the Extension PDF and the upload works. Caution everybody: the attachment is a stl file (and not a pdf) thanks again cgh

[wol0977]

Excuse me for the offtopic!

 

For all the guys (me included) who are looking for the clamps for the 6000:

Since I couldn’t find the 3D files anywhere, I may have an alternative for you.

The fabric of my 6000 had tears and didn’t look good anyway, so i removed it.

As you can see in the attached pictures i simply glued wood sticks on the metal grill and it looks good to me.

the costs:

EUR 6,5 for the wood

EUR 12 for the color (light oak)

EUR 5 for the double adhesive tape (transparent)

optional: EUR 10 for the transparent matte paint spray to fix the color

[YannChris]

Hi Matador,

Copycat? Check here:

https://www.leboncoin.fr/photo_audio_video/2509547503.htm

 

[matador]

YannChris wrote:

Hi Matador, Copycat? Check here: https://www.leboncoin.fr/photo_audio_video/2509547503.htm

Hi YannChris,

Thank you for the heads-up.

There are a lot of copycats around including people who just sell the clamps I design with the Ikea like manual but this one is not. It may be inspired but it’s not the same, it is deeper and rounder.

 

[Manulito]

Can someone tell me if he has a file for the Beosound 9000 to equip it with the wood cover? Also I try to build a cover for my Beolab 1 but struggle to identify the best position for the clamps. Anyone has some experience for the best position?

[MVee]

there is a dedicated post on the Beolab 6000 meanwhile: https://beoworld.dev.idslogic.net/forums/topic/diy-beolab-6000-wood-frets-stl-included/#post-30824

[MVee]

tuttivini wrote:

I live in The Netherlands and no 5mm slats are sold here either. So I bought 4mm slats. 4x18x2100: Which I had custom made by the wood trade to 4x13x1000 (and then a total of 28 slats for one set of BeoLabs) 4x44x2100: Which I sawed myself in a length of 1000mm (a total of 2 slats needed for one set of BeoLabs)

Did you use oak wood? I live in The Netherlands as well. Which wood supplier supplied them in the rights dimension? Have a hard timing finding the right (oak) wood. Thanks for you hints!

[MVee]

tuttivini wrote:

When I look at your STL file, I see room for 10 wooden slats, but I see a slightly longer piece on one outside and an extra notch or something like that on the other outside? The 7.1 STL doesn’t look the same as your own photo’s in your first post:

 

Did you already try on a 7.1 or 7.2? Are the clamps equal? And how does the result look?

[catch]

Do you have the file for the lens?

[catch]

cgh wrote:

I designed an acoustic lense that will fit on top of the BL 8000, Attached is the stl file. Thank you for the clips for the BL 8000, it is very appreciated. I tried to upload the stl file, but it seems not to working??

Do you have the file for the lens?

[Mikaeln1]

For the poor Australians out there who haven’t got a beautiful selection of European wood frets available here’s what I did 🙂

• goto Bunnings and buy 14 of these : https://www.bunnings.com.au/20-x-4mm-2-4m-square-edged-board-tasmanian-oak_p0081864
• Spend X hours cutting + sanding (I just made one side a bit rounded to soften it)
• Use the 5mm STL file (deeper for the 20mm wood, worked better at holding than the 4mm model) and a drop of this on each position https://www.bunnings.com.au/selleys-80g-liquid-nails-clear-construction-adhesive_p1232438
• Then you have to hold the 14 frets in place for a bit until glue dries enough

 

They look amazing btw and thank you for this thread to modernise the appearance

[cgh]

Egru123 uploaded the file for me. Please see the post from him

[Bwel]

Has anybody found a good supply for the 4mm Stripwood pieces in the U.K. ?

Many thanks,

[Bwel]

What lengths of Stripwood are people using ?

I see the design sheet here say 100cm, but other people have suggested 105cm.

I’m not sure what looks best ?

[mohcineamrani]

Hi all, while checking the 3d file i have doubts on measurements, see picture below (X, Y, Z)

 

 

thank you

mohcine

[matador]

Please guys having “doubts”…

Read the thread carefully, there are of course scale errors; x10, x1000, x100, whatever…

Just think!

Plenty of people have sorted it out and successfully made them better than me.

This is an enthusiast forum, not an after sales hotline.

With all due respect.

[matador]

Mikaeln1 wrote:

[…] goto Bunnings…

Let me invite you “poor Australian” to our European “Leroy Merlin” in exchange to you inviting me to Bunnings!

Nice work and happy to have helped…

[Mateki]

Thank you matador for sharing

[Author]

Posts