BV9 on the way upstairs

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #53176
    Ipe
    BRONZE Member
      • Finland
      • Topics Started 12
      • Total Posts 34

      Hi,

      I’m planing to “lift” BV9 upstairs. Corridor is too narrow and stairs…….hmmm. Does anyone have experience or has someone put that TV to smaller more lighter pieces? One can of course hire a crane:)

      #53177
      Valve1
      GOLD Member
        • Topics Started 4
        • Total Posts 70

        I have no idea what can be taken off. You would obviously need help but if your not comfortable trying this get a pair of house moving guys who are used to moving stuff in tight spaces.

        It is worth keeping !

        #53178
        YannChris
        GOLD Member
          • Brittany, France
          • Topics Started 27
          • Total Posts 263

          Hi,

          Unfortunately, BV9 is a 110 kg monolith and I would not take the risk to dismantle it.

          The best is to hire movers, you’ll take advantage of their tricks… and strength 🙂

          Good luck,

          Yann.

          #53179
          YannChris
          GOLD Member
            • Brittany, France
            • Topics Started 27
            • Total Posts 263

            Valve, you were faster than me 🙂

             

            #53180
            Beoaddict
            BRONZE Member
              • Topics Started 1
              • Total Posts 6

              The Beovision 9 is in fact extremely easy to disassemble, by far the easiest of all B&O TVs. The heaviest part ist the plasma panel, which ist attached with a few screws and connected to the Beosystem 3 only with a DVI connector and the mains cable. It took me around an hour to disassemble, transport and reassemble the unit within my house. The panel can be carried by one strong person or two guys of average build, as can the housing with speakers and Beosystem 3. I strongly recommend going this route.

              #53181
              Beoaddict
              BRONZE Member
                • Topics Started 1
                • Total Posts 6

                The disassembly process is (briefly) covered in the service manual, which can be found on Beoworld or via google document search.

                #53182
                Millemissen
                BRONZE Member
                  • Flensborg————Danmark
                  • Topics Started 23
                  • Total Posts 1,065

                  My only memory from such a job years ago was….back pain ?

                  MM

                  #53183
                  Evan
                  GOLD Member
                    • San Francisco
                    • Topics Started 9
                    • Total Posts 164

                    The Beovision 9 is in fact extremely easy to disassemble, by far the easiest of all B&O TVs. The heaviest part ist the plasma panel, which ist attached with a few screws and connected to the Beosystem 3 only with a DVI connector and the mains cable. It took me around an hour to disassemble, transport and reassemble the unit within my house. The panel can be carried by one strong person or two guys of average build, as can the housing with speakers and Beosystem 3. I strongly recommend going this route.

                    Wow – did not expect this as a practical option. Why aren’t more people talking about this? If I had known this, I would have been shopping a BV9 vs what I could move up the stairs at my old flat!

                    #53184
                    Ipe
                    BRONZE Member
                      • Finland
                      • Topics Started 12
                      • Total Posts 34

                      Hi, been planing to move bv9 upstairs next weekend. Checked it (TV) a bit from here and there. Should not be a bad thing to do at all. Lets see how it goes:)

                       

                      #53185
                      Ipe
                      BRONZE Member
                        • Finland
                        • Topics Started 12
                        • Total Posts 34

                        Hi, TV 124kg + two strong guys would be at least 300kgs. I really question durability of my old house stairs:) They also make 90 degree curve and are relatively steep……..

                        #53186
                        Ipe
                        BRONZE Member
                          • Finland
                          • Topics Started 12
                          • Total Posts 34

                          @Beoaddict

                          From where did you begin to unscrew? From back or front? I did not find that kind of service manual with exploded view. Just ask because I don’t want to do extra work or any mistakes:)

                          #53187
                          YannChris
                          GOLD Member
                            • Brittany, France
                            • Topics Started 27
                            • Total Posts 263

                            Hi,

                            As gold member, you have access to the service manuals at the end of this page:

                            https://www.beoworld.ouronlineserver.com/manuals_view.asp?pid=738

                            Regards,

                            Yann.

                          Viewing 12 posts - 1 through 12 (of 12 total)
                          • You must be logged in to reply to this topic.