Hi!
I have a problem with loudspeakers connected to BV 9.
If use with projector only loudspeakers on tv and subwoofer work.
Immediately when format in beo4 is pushed twice and picture shifts to projector
front speakers (beolab 8000) will cut off.
Any suggestions?
Thanks, of course 🙂
Works fine now.
Ipe
hi! you must also configure the speakers in cinema mode. (roll, distance, volume, etc.) so switch to cinema mode (format 0) and go to the bv9 (bs3) menu on the cinema screen.
beoandy
.
.
