Breaking Beomaster 8000 for Parts

This topic has 13 replies, 8 voices, and was last updated 1 year, 11 months ago by chartz.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
5 September 2022 at 04:35 #38847
alf
SILVER Member
- Topics Started 22
- Total Posts 118
hi All,

breaking a Beomaster 8000 for parts.

if you need something send me a PM.

ALF
5 September 2022 at 06:23 #38848
chartz
GOLD Member
- Burgundy
- Topics Started 3
- Total Posts 228
Hi Alf. ☺️

PM sent.
11 September 2022 at 03:06 #38850
quattttro
BRONZE Member
- Topics Started 6
- Total Posts 47
y’know the springs you get in picture frames to push the backing against the glass? Those work well as an alternative.
11 September 2022 at 03:28 #38851
Glitch
BRONZE Member
- Topics Started 15
- Total Posts 313
A replacement spring could also be made from spring steel sheet stock. It is a simple shape that could be cut out with a Dremel or nibbler tool. The stock springs are 0.5mm thick.

Glitch
11 September 2022 at 05:30 #38849
square4
GOLD Member
- Fredensborg Denmark
- Topics Started 1
- Total Posts 55
Hi Alf.

I would like to buy this steel clips.

Henrik.
13 September 2022 at 08:07 #38852
alf
SILVER Member
- Topics Started 22
- Total Posts 118
The following parts are gone:

uP board, display board, big alu cover – anything else is available ?

ALF
7 October 2022 at 01:02 #38854
alf
SILVER Member
- Topics Started 22
- Total Posts 118
Hi,

i am not quite sure what exactly you mean – please go to the service manual, check the explosion drawing and tell me the part number.

ALF
7 October 2022 at 11:12 #38853
alvar
BRONZE Member
- Topics Started 0
- Total Posts 2
Hello!

The aluminium upper board hinge is available?

I mean the long black plastic piece that attaches the alu cover to the chassis.

Regards
7 November 2022 at 04:15 #38855
didier
BRONZE Member
- Topics Started 2
- Total Posts 12
Hi Alf,

I’m looking for the wood veneer in rosewood,

The left spring (under the release rail),

and the lid damper mechanism,

I sent you a pm 🙂
16 November 2022 at 10:50 #38856
tamtapir
GOLD Member
- Sweden
- Topics Started 2
- Total Posts 8
I would love to get the glass section from your 8000.

Do you still have it?

/Di ck
17 November 2022 at 03:03 #38857
alf
SILVER Member
- Topics Started 22
- Total Posts 118
Is your glass cover broken or just scratched ?

i still have the glass cover – it is good but not mint.

please send a PM so I can mail a photo and you decide them.

ALF
6 December 2022 at 05:49 #38858
tamtapir
GOLD Member
- Sweden
- Topics Started 2
- Total Posts 8
Thank you for the glass panel.

It arrived safely today!

Best Regards,

Di ck
7 December 2022 at 11:25 #38859
alf
SILVER Member
- Topics Started 22
- Total Posts 118
Thank you so much for letting me know – that is good news ???

enjoy – regards, ALF
8 December 2022 at 07:05 #38860
chartz
GOLD Member
- Burgundy
- Topics Started 3
- Total Posts 228
Oh, MY glass panel?

What happened? ?
Author

Posts

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.