Beovision Avant 85 – screen failure

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #46916
    Billywedlock
    BRONZE Member
      • Topics Started 1
      • Total Posts 1

      I have loved my 85 inch Avant, and there was nothing wrong with image quality, but today the screen did this (see attached). I have already had one ecu replaced a couple of years ago, but this looks terminal. I am told no new panels exist, so whilst it is 8/9 years old, it looks like it is skip time for this £25k beauty. Is that all these tv’s last? If so it is a huge cost and waste.

      70703994373__A4AA8BDF-4BB6-4FF3-8E9D-AC0FE4E7D077-scaled

      #46917
      jvezina
      GOLD Member
        • Topics Started 1
        • Total Posts 43

        I would ask a B&O technician to come and inspect the set to diagnose the problem properly.

        Perhaps this is just the video engine that failed. This will be an expensive repair but this is better than to have to discard the television.

        Good luck,

        Jean

         

         

         

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.