Beovision AV9000 – no sound from speaker

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #52611
    hector99
    BRONZE Member
      • Topics Started 2
      • Total Posts 7

      Hi folks – thanks for having me :o) I think an AV9000 is classed as vintage now?

      Just saved a Beovision AV9000 (TV, base, and remote) from landfill – should I just have let it go?..

      It’s in good condition but has sat for 15 years. As with all AV things of this vintage – components will be on their way out.

      Everything works fine apart form no audio from the speaker. There is audio via line out though so it’s not a total loss.

      Does anyone know of any common faults with the amplifier board? Anyone fixing them or have spare parts? Or is it heading for it’s original destination?

      Many thanks

      #52612
      hector99
      BRONZE Member
        • Topics Started 2
        • Total Posts 7

        going, going…

        #52613
        Stoobie
        GOLD Member
          • Topics Started 7
          • Total Posts 124

          Take a look here, you might not have the complete setup.

          https://beoworld.dev.idslogic.net/prod_details.asp?pid=865

          Stoobie

          #52614
          hector99
          BRONZE Member
            • Topics Started 2
            • Total Posts 7

            Hi, Stoobie. I defininitely don’t have the complete setup – unfortunately. I would have thought setting the sound to – MONO – would have used only the integrated centre speaker though?

             

            #52615
            hector99
            BRONZE Member
              • Topics Started 2
              • Total Posts 7

              2 fuses seem to be gone – F4 and F5 on the power supply in the ‘control centre’.
              It’s a start I suppose…

              #52616
              Stoobie
              GOLD Member
                • Topics Started 7
                • Total Posts 124

                Hi, Stoobie. I defininitely don’t have the complete setup – unfortunately. I would have thought setting the sound to – MONO – would have used only the integrated centre speaker though?

                I’m sorry, I should have been clearer, I wondered if the sound controls are handled by the missing Master Control Panel AV9000.

                However spec on Beoworld shows :-

                Daily operation recommended: Beo4
                Sound processing: Dolby Surround Sound, Pro-logic decoder Sound modes (sound 1-5) Mono (Centre speaker) It will auto-detect if speakers are added.

                So maybe Mono will work and there is another issue.

                Stoobie

                #52617
                hector99
                BRONZE Member
                  • Topics Started 2
                  • Total Posts 7

                  Changed the fuses but they immediately blew. Checking the bridge rectifiers – there’s a short between the AC terminals on one of them and not the other. They’re cheap so I’ll change them and see what happens. Super simple PSU so surely there’s not a lot to go wrong…

                   

                  Feel free to chip anyone – I’ve not touched electronics for years and forgotten most of it!

                  Is this in the correct sub forum? Thought some electronic guru might have had something to say by now.

                  #52618
                  hector99
                  BRONZE Member
                    • Topics Started 2
                    • Total Posts 7

                    Oh well – going by the dearth of replies I guess no one will be wanting any spare parts before it’s skipped…

                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.