- This topic has 6 replies, 3 voices, and was last updated 9 months ago by Madelvic.
- AuthorPosts
- 19 February 2024 at 08:31 #52916
I’m trying to restore a Beomaster 1900-2
The Phone and Tape inputs work fine, but the FM input on any of the 4 presets or 5th tuner is low in volume and crackles
So far I’ve changed all of the electrolytic in the Tuner and IF / Stereo Decoder (reference the Service Manual) but to no avail
Any help would be welcome – I’m basically stuck (and at the limit of my knowledge)
Many thanks
20 February 2024 at 02:11 #52919Thanks Derek. Yes I’ve changed C201, C202, C203 (and the C3xx) plus C23, C20, C99, C27 and recently C18 in the can though not tested it since the last change. C18 was reading about 17uF so working but well out of range. I’ve tested C15 but not changed it.
Wondering if I should change the transistors- will stress them with cooling spray first if I can
20 February 2024 at 02:13 #52920Thanks Martin. Can do, would you recommend before transistor swaps?
20 February 2024 at 02:59 #52917Have you changed the electrolytic capacitors C201, C202, C203, (and corresponding on right channel)?
There is also a 10uf cap inside the can.
Derek
20 February 2024 at 09:07 #52918A bad MPX chip wouldn’t be a first.
Martin
20 February 2024 at 10:26 #52921Yes, I would suspect the IC before any of the small transistors.
Put a scope to the L/R signals from the IC and you will see.Martin
22 February 2024 at 09:26 #52922Found and ordered a replacement IC. Update to follow
- AuthorPosts
- You must be logged in to reply to this topic.