Beomaster 1200 FM, MW, LW lamps not working

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #53810
    Squidge1825
    BRONZE Member
      • Topics Started 4
      • Total Posts 12

      Hi there, I was wondering if someone could literally shed some light on a problem I have.

      Neither the FM, MW or LW lamps are working on my system. The ON and Stereo lamps work, and I have swapped to bulbs round to eliminate the bulbs being at fault.

      Not sure if it makes a difference but I am testing it with the button and slider panels off.

       

      Thanks

      Matt

       

       

      #53811
      Dillen
      Moderator
        • Topics Started 3
        • Total Posts 602

        The band lamps intensity depends on the signal strength.
        You could have a bad antenna signal.

        Martin

        #53812
        Squidge1825
        BRONZE Member
          • Topics Started 4
          • Total Posts 12

          ah ha ok, hmm, i might have a problem somewhere.

          I have plugged in the antenna, albeit the white plastic connector, but none of the lamps even shine a small amount even after moving the tuner all the way from left to right

           

           

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.