[Squidge1825]

Good afternoon. I am hoping someone can help me.

I have ordered a replacement capacitor kit for my Beomaster 1200 and I have changed all but 2.

They are the two large capacitors shown in the images. I will be replacing them with the two capacitors that came with the kit.

On the copper capacitor there is a +ve and -ve marking but on the white capacitor there arnt any markings. I did notice that on one of the terminals, it is indented (the right one) whereas the left one is just flat. Did I read somewhere that this means something? (Old Skool).

Anyway, I am not sure what terminals the yellow or green wires should connect to on the new capacitor. Any help would be fantastic,

Thanks in advance

[Squidge1825]

UPDATE

I found this image within the service manual. Green is labelled ‘gr’ with a negative symbol, and the other, labelled ‘g’ (I presume from the german word for yellow ‘Gelb’) with a +ve symbol

 

I guess this is it then

Matt

[Dillen]

On the grey capacitor it says “Plain negative”.
In other words, the tag with no mark on its rivet is the negative.

Martin

[Squidge1825]

Fantastic, that would for with the drawing, thanks for confirming.

all the best

[Author]

Posts