Hello, I have a pair of BeoLab 8000’s from 2007 that I am redoing the boards on. I made a grave mistake and forgot to write the expected levels for the tweeter and the woofer on the amplifier. On the service manual, it states to set the tweeter to 2.95V and the woofer to 4.8V for a 100 mv 10k and 1k signal respectively. I cannot find anything about what to set these to for post ABL updated ones like mine. It seems unlikely that this should be the level stated for the MK1s.
Has anyone seen a service bulletin about this, or have ideas on what the levels should be set to?
.
.
