[69er]

Hi guys,

I am struggling with a Beogram 7000 CD.

 

It started with does not read discs, runs after a short attempt in the wrong direction.

 

i cleaned the laser

Exchanged all capacitors on pcb30 (used also the blue 2103). A little bit better. But still not working.

exchanged the whole pcb from another working bo 7000. Worked

so the error is still on this pcb

 

exxhanged the two transistors 6124 and 6125

 

now it runs in the right direction and tries, but does not find the first track and stops

 

what other part on the pcb should I exchange? I don’t think someone screwed the 3106 or 3146 as everything was super dirty and looked original

 

best regards

69er

[Die_Bogener]

Check the wires and sockets… the solder can be broken.

 

[69er]

MMh,

i exchanged now also the third transistor on the PCB3, changed also another blue capacitor and checked the sockets. I resoldered some, but they looked good .

no change.

The player starts and then stops after about 10 seconds.

What makes me nuts – it needs to be on this PCB as with another one the player worked well.

What else could it be?

best regards

69er

[69er]

Anything i could test or do additionaly?

[Author]

Posts