Beogram 5500 DIN connector - BeoWorld Forum

Beogram 5500 DIN connector

This topic has 3 replies, 3 voices, and was last updated 2 years ago by Ismo.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
4 November 2022 at 09:43 #40509
Ismo
BRONZE Member
- Topics Started 3
- Total Posts 12
Hi,

Can anyone tell why there is 2 different din connectors for Beogram 5500 ? 5pin connector and 7pin connector. Below is the 7pin connector that has 2 bottom (thicker) pins as extra.

Regards,

Ismo
4 November 2022 at 11:15 #40510
Mark-sf
BRONZE Member
- Topics Started 0
- Total Posts 297
The extra pins in the 7-pin one carry the Datalink signal to Beomaster receivers for remote control. The pins can be unscrewed to use with a DIN-RCA adaptor.
5 November 2022 at 04:54 #40512
Ismo
BRONZE Member
- Topics Started 3
- Total Posts 12
Thanks for fast answers.

Ismo
5 November 2022 at 11:44 #40511
Guy
Moderator
- Warwickshire, UK
- Topics Started 15
- Total Posts 1,270
But if you do remove the two extra pins keep them somewhere safe so that future users of the Beogram can use datalink again! ?
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.