Beogram 3000 solenoid issues?

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #41494
    RichC
    BRONZE Member
      • Topics Started 1
      • Total Posts 4

      Just had the problem out of the blue of buzzing and not connecting when pushing the button . Took the base off and noticed th contact breaker for the lower orange arm in particular here was buzzing and sparking but not holding together. Nothing obvious so guess it’s just showing its age. Is there aquick fix? Or at least, a diagnosis from you experts please? I’ve another b&o deck so it’s not the end of the world, but would be nice to fix it I can?D07D6A2F-37DC-4008-8540-66AD80C87578

      #41495
      Dillen
      Moderator
        • Topics Started 3
        • Total Posts 602

        Check the diode.

        Martin

        #41496
        RichC
        BRONZE Member
          • Topics Started 1
          • Total Posts 4

          Thank you Martin!
          I’m looking for a service manual/ schematic to see what rating the diode is…
          Where will I find it? Forum says not found

          #41497
          Mark-sf
          BRONZE Member
            • Topics Started 0
            • Total Posts 297

            While you are at it I would also replace that cap.

            #41498
            RichC
            BRONZE Member
              • Topics Started 1
              • Total Posts 4

              Thanks and pleased to say the diode replacement solved the problem. However I must have done something else as the turntable is always spinning . It does not stop when the tonearm parks.
              I’m scratching my head with this problem. Can anyone suggest the solution please?
              RichC

              #41499
              RichC
              BRONZE Member
                • Topics Started 1
                • Total Posts 4

                Sorted! Seems I had not quite put it back together the way it came apart!!

              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.