Beogram 1600 arm going back to rest position after 2 seconds - BeoWorld Forum

Beogram 1600 arm going back to rest position after 2 seconds

This topic has 2 replies, 2 voices, and was last updated 7 months, 2 weeks ago by asgaard.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
6 April 2024 at 11:50 #54150
asgaard
BRONZE Member
- Topics Started 2
- Total Posts 8
Hi all,

I bought this turntable on one of the auctions few weeks back.

When I placed the record and pressed start, it started turning, the arm moved towards the record, and then immediately went back to its rest position. The wheel did not stop. It will stop when I press Stop button.
7 April 2024 at 05:18 #54152
asgaard
BRONZE Member
- Topics Started 2
- Total Posts 8
Hi Martin,

That’s actually a good question. I’m a beginner, so not sure about tracking force, but the cartridge is MMC 10 E .

Thanks

btw. I will post some pics (as I took off the plate) over the weekend
7 April 2024 at 09:24 #54151
Dillen
Moderator
- Topics Started 3
- Total Posts 602
Which cartridge are you using?
And what is the tracking force set to?

Martin
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.