Beocenter 2200

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #45940
    Dillen
    Moderator
      • Topics Started 3
      • Total Posts 602

      What parts are not available?

      Check if the motor bushing touches the metal bracket.
      If it does – replace the motor mounts.
      https://www.beoparts-shop.com/product/motor-suspension-rubber-bushing-grommet-f-several-beogram-beocenter-models-2/

      If the motor itself is noisy, it must be taken apart and repaired (most can be)
      – or replaced, and a good condition used original motor would be the way forward in that case.

      Martin

      #45941
      si_wallace
      BRONZE Member
        • Topics Started 1
        • Total Posts 2

        Thank you. I will investigate.

        #45939
        si_wallace
        BRONZE Member
          • Topics Started 1
          • Total Posts 2

          Hi. I recently inherited my fathers 2200 and it plays beautifully. But the turntable makes a ticking noise which is very evident when playing a quiet record. B&O tech in Barcelona tell me they cannot fix due to parts not being available. Any guidance? Thank you.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.