Beo4 remote to beosound 9000

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #47365
    Peter7865
    BRONZE Member
      • Topics Started 1
      • Total Posts 1

      Help please

      had my beo4 stored for 12 months without batteries. Just put new batteries in and the remote seems to be functioning. Can see signal and navigate through the menus.
      but seems beosound not detecting the remote. The beosound is functioning like new, but cannot get remote to work with it,

      any help please

      #47366
      Guy
      Moderator
        • Warwickshire, UK
        • Topics Started 15
        • Total Posts 1,270

        Hi and welcome to Beoworld!

        The BS9000 may be in A.OPT 0, where it will not respond to IR commands.

        To resolve this:

        Turn to standby/off.

        On the Beo4, press the POWER button and LIST together. Then press LIST until OPTION is shown, press GO (centre button), and then press LIST to show A.OPT. Then press 1. The power light on the BS9000 may blink to show that it has been accepted.

        Remote control should then work.

        EDIT: By the way, A.OPT 0 is automatically selected if no speakers are connected to the BS9000

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.