5500 master ctrl panel round dial repair? - BeoWorld Forum

5500 master ctrl panel round dial repair?

This topic has 3 replies, 2 voices, and was last updated 1 year, 3 months ago by ummagumma.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
21 August 2023 at 03:56 #48366
ummagumma
BRONZE Member
- Topics Started 4
- Total Posts 38
Hi, the round spinning dial on my master control panel 5500 has stopped working. All other functions & buttons work. I opened it up & tried 99% iso swabbing the 2 contacts that touch, when the dial is spun either direction, but it didn’t make any difference.

Thanks for any advice!
21 August 2023 at 04:36 #48367
Guy
Moderator
- Warwickshire, UK
- Topics Started 15
- Total Posts 1,270
It could well be a faulty (or dirty) opto-coupler – have a look at this thread (and the pictures attached to some of the posts): https://archivedforum2.beoworld.ouronlineserver.com/forums/p/22025/182754.aspx#182754
21 August 2023 at 04:38 #48368
ummagumma
BRONZE Member
- Topics Started 4
- Total Posts 38
Ah: found this thread on the archived forum, looks like it’s the microswitch as the unit doesn’t respond when I spin the dial:

https://archivedforum.beoworld.org/forums/t/35687.aspx
21 August 2023 at 04:40 #48369
ummagumma
BRONZE Member
- Topics Started 4
- Total Posts 38
Oh, thanks! I was researching & found that other link too, replied while you posted. Will check it out!
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.